H.C. Warner Filtration

Hydac Autofilt Automatic Strainers

2011-03-03T07:51:00.000-08:00

H.C. Warner is pleased to announce that they have been selected to represent Hydac Filters for their AutoFilt Backwashing Automatic Strainers in Florida. These are commonly called de-sanders in the municipal water industry because they help reduce the sand that comes out of the wells before it hits the prefiltration and membranes. These units are available in carbon and stainless steel, ASME code design, from 2" to 36" connections for flows up to 31,000 gallons per minute!

Other industries that also benefit from the use of a Hydac Autofilt are the steel industry for protecting cooling noozles, cooling towers to keep the water free from debris, chemical plants for bulk reduction of contaminants in process water, and the automotive industry to keep coolants and parts washers clean.

Please contact us if you would like to learn more about how a Hydac Autofilt can improve your process and productivity.

New! Parker Fulflo Pleated Bag

2010-02-03T14:03:00.000-08:00

Parker Advanced Filtration Division annouces its newest product offering: the Fulflo Pleated Bag (PB) Series. Drawing from the medias currently available in its high-end pleated filter cartridge line, the PB series allows you to have the same medias in a bag housing. This will increase your dirt-holding and flow capabilities tremendously if you are used to using 2.5" cartridges. If you are replacing a high efficiency bag, then you have the capability of even tighter filtration and longer run times between change outs. Available in 90% nominal and 99.9% absolute ratings, polypropylene or glass fiber media, the PB series should meet most stringent filtration requirements.

Increased yields on plastic molding

2010-02-03T13:24:00.000-08:00

Using Beko Technologies BekoBlizz, you can increase your yields on rotational or blow molding plastics by reducing part cooling times. Beko Blizz can deliver -49 degrees F dry compressed air, optimizing deep cold air cooling systems. Instead of investing in more molding machines, why not investigate the possibility of increased production from your existing machines?

Contact H.C. Warner, Inc. for more information on how Beko Blizz can benefit your plastic molding operation.

Paint & Ink Filtration

2009-04-07T14:40:00.000-07:00

Filtering paints, inks, adhesives, and other very thick fluids, can be a challenging task. Thicker viscosities make some filtration technologies such as wound cartridges useless as the pump has to work too hard to push the liquid through. This is where the term "void area" in a filter comes into play - the more void area (the space in between the fibers of a filter), the easier it is to flow thick solutions through.

Good choices include Parker's ProBond filter cartridge, bag filters, wedgewire screens, and strainers. Please consult with a H.C. Warner engineer for proper filter selection.

Beko USA Grand Opening

2008-11-24T08:46:00.000-08:00

Clay & Tom attended BEKO USA's Grand opening in Atlanta recently. BEKO USA's new facility features hollow fiber membrane manfacturing, winding, and final assembly of their industry leading Drypoint M membrane dryers. In addition, BEKO will be stocking in Atlanta many of their world-famous products like Bekomat Zero Loss Drains, compressed air filters, oil/water separators, and refrigerant dryers.

People from all over the world attended this meeting with featured a Gala Dinner @ the Georgia Aquarium, hosted my Wolfgang Puck.

H.C. Warner, Inc. is very excited to be working with Beko to provide our customers with the best in compressed air ancillary equipment.

Transformer Oil Dehydration System

2008-08-27T12:52:00.000-07:00

H.C. Warner, Inc. is a long time representative of Velcon Filters of Colorado Springs. Velcon specializes in oil/fuel filtration and has state of the art equipment for drying out transformer oil. Dissolved water in transformer oil reduces the effectiveness of the oil to insulate the transformer. Excessive water can cause arching, which creates carbon particulate in the oil.

Water reduces the oil's dielectric strength, thus reducing the efficiency of the transformer.
Velcon's Superdri system removes dissolved water through a patented molecular sieve process, eliminating the need for heat or vacuum. Utilities operators and technicians prefer Velcon Superdri systems due to their ease of use and ultimate effectiveness.

Shows we are attending this Summer

2008-06-20T08:40:00.000-07:00

Hello! The Summer has been busy for tradeshows. We have been in attendance at Aquatech China in Shanghai, AWWA in Atlanta, and AMTA in Charleston. Our next big show with a display is July 14-17th in Naples, Florida for the joint AMTA/SEDA conference. Please come see us there!

New Website

2008-04-15T08:12:00.000-07:00

H.C. Warner's latest website update went live on April 4th, 2008. Added are about 30+ new products, an article about our founder, and easier browsing menus. Be sure to check our our new "Miscellaneous" section, which features some products and services you might not know we carry.

Our newest line is AVANTech from Columbia, South Carolina. AVANTech specializes in water treatment equipment - building exactly what you need per your specifications. Their background comes from the nuclear power industry, so their expertise is vast. Their website is www.avantechinc.com

Our Founder

2008-03-11T08:35:00.000-07:00

Henry Clay Warner was a lubrication engineer for Gulf Oil when he became aware of the need for filtration equipment in some of the applications he encountered. He founded H.C. Warner, Inc. in 1946 in his garage in Jacksonville, Florida. A graduate of the University of Florida, H.C. was an offensive tackle (at 5'10", 175 lbs.) and a champion wrestler. His youngest son Bill took over H.C. Warner, Inc in 1966. H.C. entertained swimmers at the "Y" by doing handstands on the diving board when he was 66 years old until the lifeguards kicked him out.

Municipal R/O Filtration

2008-03-11T08:08:00.000-07:00

H.C. Warner specializes in providing prefiltration for membranes that are desalinating the water that many Floridians drink. These typically include a large stainless steel housing and filter cartridges that we developed specifically for this industry - the HFT series cartridge. Flows up to 2,000 GPM are not uncommon, and normally 5 micron retention filters are used. Brackish or seawater is filtered, then sent directly to the membranes for salt separation. We have been involved in over 60 installations in the Southeast alone.

Welcome!

2008-03-05T14:39:00.000-08:00

This is our first entry in H.C. Warner's industrial filtration blog. We will be updating you on new products, innovative ideas, fun facts about our company, and other oddities. Bookmark and check back often!